Skip to main content
A custom pricing feed is a tire price list TireTutor loads for your store. If your prices come from one, you can replace it with your own Tire Markups settings. You do not need to call TireTutor. The switch takes about 10 minutes.
You need Owner or Administrator access for your whole dealership to change markups. Access to one store isn’t enough. If you can’t open or save Tire Markups, ask a dealership Owner.

Before you start

Follow two rules:
  1. Make the switch after business hours. After you select Confirm save, TireTutor recalculates your prices. Until it finishes, customers can see a mix of old and new prices.
  2. Turn the custom feed off in the same save that turns your distributors on. Make both changes before you select Save changes.

Connect your distributors first

1. Distributors lists your custom feed and the distributors you have connected. If one you buy from is missing, connect it after business hours, as Connect your distributors describes. Then go straight to Tire Markups and turn the custom feed off. TireTutor turns on a new distributor right away, so its prices mix with the custom feed’s until you save.

Replace the custom feed with your distributors

1

Open Tire Markups

In the left menu, under Shop Settings, select Tire Markups. Then open 1. Distributors.
The dashboard home page with the Shop Settings group open in the left menu. Under it are Tire Markups, Parts & Wheels Markups, Menu Services and More Settings.
2

Turn on each distributor you buy from

Turn on the Enabled switch for each one.
3

Turn off the custom feed

Turn off the Enabled switch for the custom feed.
4

Choose a markup type for each distributor if you want one

Select Fixed ($) or Percentage (%).
5

Enter the markup value

Type the amount. You can leave the markup at zero.
6

Mark your main distributor as Primary

Select Primary for the distributor you buy from most. Only one distributor can be primary.
1. Distributors tab with 4 unsaved changes. Custom - Demo Tire Co is switched off and marked Disabled. Demo Tire Distributors and Sample Wholesale Tire are switched on, and Demo Tire Distributors is selected as Primary.

Turn the custom feed off in the same save that turns your distributors on.

Choose a pricing scheme

When several distributors carry a tire, your pricing scheme picks one marked-up price.
1

Open 2. Pricing Scheme

Review the five schemes.
2

Select a scheme

Mean uses the average of your distributors’ prices. Min (6 in stock) uses the lowest price from a distributor with at least six tires in stock. It skips a distributor with fewer than six tires in stock.
2. Pricing Scheme tab listing Mean, Median, Min (in stock), Min (6 in stock) and Max. Min (6 in stock) is selected; the saved scheme is still Mean.

Min (6 in stock) skips a distributor with fewer than six tires in stock.

If your primary distributor carries a tire, its marked-up price is the lowest base cost your store uses. The scheme sets the price when it comes out higher, or when your primary distributor doesn’t carry the tire. The markup reference compares all five schemes.

Choose the brands you sell

Add All, Remove All and Use TireTutor AI brand ordering apply right away. They don’t wait for Save changes.
1

Open 3. Brands

Find each brand you sell in the list.
2

Remove the brands you don't sell

Select the trash can icon on the row of each brand you don’t sell. A brand without a row does not appear in your catalog.
3. Brands list searched for Co. Continental has a $0.00 markup and Cooper a $5.00 fixed markup. Each row ends with a trash can icon.

Search for a brand to find its row. The trash can icon removes it from your catalog.

3

Add a brand markup if you want one

For example, add $5 to one brand and $10 to another. Leave the markup at zero for no extra amount.
4

Set the brand order

Drag the brands into the order you want. Or turn on Use TireTutor AI brand ordering.

Add a markup that covers every tire

1

Open 4. Custom Markups

Review the rules in the Tire Price Markup section.
2

Set a catch-all Tire Price Markup rule

If a rule with every condition open is already there, edit it. Otherwise, add one and leave every condition open, so the rule matches every tire. TireTutor’s Standard preset uses a 30% markup. Choose a tire markup preset compares the presets. Without a catch-all rule, a tire that matches no other rule gets no custom markup.
Edit Tire Price Markup Rule dialog. Markup % reads 30 with the % button selected. Tire type is Any and the cost range, aspect ratio and rim size fields are empty.

A rule with every condition left open matches every tire.

3

Add rules for groups of tires if you want them

A rule can match by tire type, cost range, aspect ratio or rim size. The markup reference explains each condition.

Review and save your new prices

1

Check the Live Price Preview

The panel on the right shows the average price change, the percent change and the number of tires affected. Except for the three 3. Brands controls above, your changes wait until you save.
Tire Markups with 4 unsaved changes. The Live Price Preview panel on the right shows Avg Price Change +$4.18, Avg % Change +3.2%, 1015 of 1240 tires affected, and 58 tires removed from the catalog.

The preview estimates your new prices before you save.

2

Save your changes

Select Save changes.
3

Confirm the change summary

The Review your pricing changes dialog lists each change. If a distributor change removes tires from your catalog, a warning shows how many listings leave your storefront. Select Confirm save to apply the changes. A Pricing changes saved message appears.
Review your pricing changes dialog. A warning says the save removes 58 listings from your storefront. Under Distributors, Custom - Demo Tire Co changes from Enabled to Disabled, Demo Tire Distributors becomes Primary and Enabled, and Sample Wholesale Tire becomes Enabled.

Select Confirm save to apply the changes listed in the dialog.

Check your prices the next morning

Look up three to five sizes you sell often. Check them in the Tire Catalog and on your website. If a price looks wrong, change the setting on its tab. Then select Save changes and Confirm save.

Common questions

You can, but it has no effect while that distributor is off. Set Primary when you turn it on.
Primary sets a floor on top of the scheme. The scheme picks a marked-up price when several distributors carry a tire. The floor then keeps the price at or above your primary distributor’s marked-up price.
Mean uses the average price. Min (6 in stock) gives a lower price, but only uses a distributor with at least six tires in stock.
It gets the catch-all rule’s markup. If you have no catch-all rule, it gets no custom markup.
You can, but customers can see a mix of old and new prices while TireTutor recalculates. Make the switch after business hours.

If it doesn’t work

Still need help?

Contact support through the contact form, or call 855-400-4521.

Where to go next

Getting started

Set up tire markups from distributors through custom rules.

How your price is calculated

Follow a tire from distributor cost to installed price.

Markup reference

Look up schemes, fields, rule conditions, and strategy options.

Get prices in the Tire Catalog

See your cost and sell price for every tire.