Skip to main content
You need Owner or Admin access for your dealership, or for the store selected at the top left. Without it, Shop Settings does not list Distributors. Ask an Owner or Admin to connect the distributor.If you have that access and Distributors is missing, contact support.
A connection to a distributor gives you two things:
  • Ordering lets you buy the distributor’s tires in the Tire Catalog.
  • Pricing loads the distributor’s prices and stock into TireTutor. You then set your markup on them in Tire Markups.
Each store has its own connections. The page shows the store selected at the top left. To connect another store, switch to that store first.

Open your distributors

1

Open Shop Settings

In the left menu, select Shop Settings.
2

Open Distributors

Select Distributors. The page shows one tile for each distributor you can connect.
The left menu with Shop Settings open and Distributors selected.

Distributors sits under Shop Settings in the left menu.

The Distributors page. Tiles for Demo Wholesale Tire, Powered by TireTutor, with a Connected chip and a count of its connected locations; K&M Tire with the line This is not the K&M Tire in North Carolina, a Syncing prices chip and Up to 48 hours; D&K Tire Not connected; S&S Tire with a Connected chip; US AutoForce with an Awaiting activation chip and Up to 2 business days; and two HITS distributors, Tom Fouts Tire and Tire Depot, Not connected. Each tile has Ordering and Pricing marks and a Connect or Edit button.

Each tile shows a distributor's status, and whether ordering and pricing are on.

Some distributors take orders through HITS, an ordering system made by Andreoli. Each of these distributors has its own tile, with the distributor’s name on it. A HITS distributor gives you ordering only, not prices. Some tiles show a gray line under the name, such as an address. The K&M Tire tile reads This is not the K&M Tire in North Carolina. If you buy from the K&M Tire in North Carolina, contact support. Each distributor connects in its own way. If the tile shows Set up by our team, follow Ask our team to connect a distributor instead.

Connect a distributor with your account details

Use these steps for D&K Tire and S&S Tire when their tile has a Connect button. Use them for a HITS distributor too, if you have your Customer Number and Password. If the tile shows Set up by our team, see Ask our team to connect a distributor.
1

Select Connect

Select Connect on the distributor’s tile.
2

HITS distributors only: open the manual form

Select Already have the credentials? Enter them manually. The dialog shows Customer Number and Password. To go back to the request, select Don’t have them? Ask Tire Depot to set them up, with the name of your distributor.
Configure Tire Depot dialog with required Customer Number and Password fields, a Where do I get these details? note, a link that reads Don't have them? Ask Tire Depot to set them up, and Cancel and Configure buttons.

A HITS distributor's Customer Number and Password, entered by hand.

3

Enter your account details

Fill in the fields the dialog asks for. If you do not have them, ask your distributor. The dialog says which details to ask for. A HITS Customer Number takes digits only.
4

Select Configure

Select Configure. A D&K Tire has been configured. message appears, with the name of your distributor.
Configure D&K Tire dialog with an API Key field, a Where do I get my API Key? note that reads Contact D&K Tire to get your API Key, an Advanced settings link, and Cancel and Configure buttons.

The dialog asks for the details this distributor uses.

Ordering turns on as soon as you save. TireTutor does not test your details when you save. To check them, select Edit on the tile, then Test saved configuration. See Change your details or test a connection. If the distributor offers prices, TireTutor starts to load them. The tile shows Syncing prices while they load.

Connect TireHub

TireHub is in beta, so not every store has it. If your Distributors page shows no TireHub tile, contact support.
TireHub connects with your TireHub account number. TireTutor checks with TireHub that the account is yours before it turns on ordering and prices. Have these ready:
  • Your TireHub account number. It is your ship-to number with TireHub. If you do not know it, ask TireHub.
  • The right ZIP code for your store. The store’s ZIP code in TireTutor must match the ZIP code TireHub ships your account to.
1

Select Connect

Select Connect on the TireHub tile.
2

Enter your account number

In TireHub Account Number, type your account number. It takes digits only.
3

Select Configure

Select Configure. TireTutor checks the account with TireHub.When the check passes, a TireHub has been configured. message appears.
When the check passes, ordering turns on and TireTutor starts to load TireHub’s prices. The tile shows Syncing prices, then Connected. After that, TireTutor updates TireHub’s prices and stock every morning.
A row of distributor tiles. The TireHub tile shows a green Connected chip, Ordering and Pricing checked, and an Edit button. US AutoForce, Tom Fouts Tire and Tire Depot show Not connected and a Connect button.

TireHub connected, with ordering and prices on.

When the check fails, TireTutor keeps your account number, but ordering and prices stay off. The dialog and the tile say why. See Fix a TireHub account check.

Ask K&M Tire for your API key

K&M Tire sends your API key straight to TireTutor. You do not need to look it up.
1

Select Connect on K&M Tire

Select Connect on the K&M Tire tile.
2

Type your K&M account number

Type it in K&M Account Number (optional). If you do not know it, leave the box empty.
3

Select Request API key

Select Request API key.
Configure K&M Tire dialog. It says K&M Tire issues the API key directly to TireTutor, and that TireTutor emails K&M Tire a secure one-time link and copies you on that email. A note reads Activation can take up to two business days. Below it is an empty K&M Account Number (optional) box with the hint Helps K&M Tire find your account. Links read Already have the key? Enter it manually and Advanced settings. Cancel and Request API key buttons.

K&M Tire enters the key for you, so the dialog has no key field.

A We’ve asked K&M Tire to activate your account. You’ll get an email once it’s connected. message appears. TireTutor emails K&M Tire a link to enter your key, and copies you on that email. Activation can take up to two business days. When K&M Tire enters the key, TireTutor checks the connection and turns on ordering. Then it emails you. Until K&M Tire enters the key, the K&M Tire tile keeps its Connect button. Select it to see where and when TireTutor sent the request. If you already have your API key, select Already have the key? Enter it manually in the dialog. Enter the key in API Key. Select Configure. For every step with screenshots, and what to do if you sent the wrong number, see Connect K&M Tire with your account number.

Ask a HITS distributor to set up your connection

A HITS distributor can set up your connection for you. You do not need your Customer Number or Password for this.
1

Select Connect on the distributor

Select Connect on the HITS distributor’s tile.
2

Enter your customer number if you know it

Enter it in Customer Number (optional). Your distributor checks it and can change it. Leave the field empty if you do not know it.
Configure Tom Fouts Tire dialog. It reads You don't need to look up your Customer Number and Password. We'll email Tom Fouts Tire a secure one-time link to set up your connection. A note reads Activation can take up to two business days. An optional Customer Number field, a link that reads Already have the credentials? Enter them manually, and a Request connection button.

Your distributor sets up the connection, so the dialog has no password field.

3

Select Request connection

Select Request connection. A message appears, with the name of your distributor:We’ve asked Tom Fouts Tire to set up your connection. You’ll get an email once it’s connected.
4

Select Done

The dialog says where TireTutor sends the request, and that activation can take up to two business days. Select Done.
Configure Tom Fouts Tire dialog. It reads Your request is being sent to hits-requests@example.com. We'll email you once Tom Fouts Tire enters your Customer Number and Password and the connection is verified. Activation can take up to two business days. A link reads Already have the credentials? Enter them manually, and a Done button.

The dialog names the address TireTutor emails the request to.

The tile shows Awaiting activation and Up to 2 business days. It keeps its Connect button. Select it to see the address TireTutor uses for your distributor.
Two HITS distributor tiles with the generic HITS logo. Tire Depot reads Not connected. Tom Fouts Tire has an Awaiting activation chip, the line Up to 2 business days, an Ordering mark with a clock and Pricing crossed out because HITS offers no prices. Both tiles have a Connect button.

Tom Fouts Tire waits for its HITS distributor; Tire Depot is not connected yet.

TireTutor emails your distributor a secure link. You do not get a copy of that email. Your distributor sets up your account in HITS, then enters your details on the link. Ordering turns on right away, and the tile shows Connected. TireTutor then checks the connection. It emails you when the connection works, or when your distributor’s details do not work. Each store sends its own request. To connect another store, switch to it at the top left.

Ask US AutoForce to turn on your account

1

Select Connect on US AutoForce

Select Connect on the US AutoForce tile.
2

Enter your Account ID

Enter your US AutoForce account number in Account ID.
3

Keep the box checked

Leave Ask US AutoForce to enable this account checked.
4

Select Configure

Select Configure. A US AutoForce has been configured. message appears.
Configure US AutoForce dialog with Account ID DEMO-10042 and a checked box, Ask US AutoForce to enable this account. A note reads Activation can take up to two business days. US AutoForce gets an email with a one-time link to confirm the account is enabled. We'll email you once ordering works.

With the box checked, TireTutor asks US AutoForce to turn on your account.

TireTutor emails US AutoForce a link to confirm your account. It also emails you a confirmation. Activation can take up to two business days. When US AutoForce confirms, TireTutor checks the connection and emails you. If you clear the box, TireTutor saves your account and turns on ordering. It does not ask US AutoForce, and no email goes out.

Connect a wholesaler on TireTutor

Some wholesalers run their business on TireTutor. Their tiles carry a Powered by TireTutor logo. They give you ordering only, not prices. A wholesaler’s tile appears after the wholesaler invites your email address to their portal.
1

Select Connect on the wholesaler

Select Connect on the wholesaler’s tile.
2

Connect each location you buy from

Select Connect next to each location. A The location has been connected to this store. message appears.
Connect Demo Wholesale Tire dialog reading Connect the locations you buy from. Springfield Warehouse shows Connected, Riverside Warehouse has a Connect button, and Lakeview Warehouse shows Another store.

Connect each wholesaler location you buy from.

The tile then shows how many of the wholesaler’s locations you connected. To connect more locations later, select Edit on the tile. A location can show one of these instead of Connect:
  • Connected: this store already orders from the location.
  • Another store: a different store in your dealership uses the location.
  • Another dealership: a different dealership uses the location.

Ask our team to connect a distributor

When a tile shows Set up by our team, you cannot connect that distributor yourself. Send a request with your account number, and our team connects it for you. Use the Request connection button on the tile itself. The Request connection button inside a HITS distributor’s Connect dialog is different. It emails the distributor a link, and it does not ask our team. See Ask a HITS distributor to set up your connection.
The Distributors page. K&M Tire and US AutoForce show Not connected and a Connect button. D&K Tire, S&S Tire and Tire Depot show Set up by our team and a Request connection button. Tom Fouts Tire shows Requested Oct 20, Up to 5 business days, and a grayed-out Request sent button.

Set up by our team marks a distributor our team connects for you.

1

Select Request connection

Select Request connection on the distributor’s tile. A dialog opens. Its title names your distributor, for example Request a connection to D&K Tire.
2

Check your store's details

Under Your store’s details, the dialog shows your store, its address, the store’s phone, and you as the contact. If a detail is wrong, send the request and tell support what to correct. After you send it, select Requested on the tile to find the support email and phone.With your request, our team gets your store, its address, your name and email, and the phone number on your TireTutor user account. If your account has no phone number, our team gets the store’s phone.
Request a connection to D&K Tire dialog. It reads Our team sets up D&K Tire for this store. This usually takes up to 5 business days. Under Your store's details, it lists the store Riverside Tire & Auto, the address 120 Main St, Springfield, IL, 62701, the phone (217) 555-0142 and the contact Alex Rivera, alex@example.com. A required field, Your D&K Tire account number, and Cancel and Send request buttons.

The dialog shows your store's details, and asks for your account number.

3

Enter your account number

Enter your account number in the field named after your distributor, for example Your D&K Tire account number. If you do not know it, ask your distributor. If you select Send request with the field empty, a message such as Enter your D&K Tire account number. appears under the field.
Request a connection to D&K Tire dialog with an empty Your D&K Tire account number field outlined in red, and the message Enter your D&K Tire account number. under it.

With the field empty, Send request shows what to enter.

4

Select Send request

Select Send request. The dialog closes, and a message names your distributor, for example:Request sent. Our team will connect D&K Tire for you.
The tile shows Requested and the date you sent the request, with Up to 5 business days below it. Its button reads Request sent and is grayed out.Nobody else at your dealership needs to do anything.
When our team connects the distributor, the tile shows Connected, or Syncing prices while TireTutor loads the distributor’s prices. TireTutor does not email you when you send a request, or when our team connects the distributor. Check the tile.

Questions about a request

No. A tile that shows Set up by our team has no Connect button. Send a request, and our team connects the distributor for you.
Ask your distributor for it. You need it to send the request.
Not on the Distributors page. Contact support with the correct number. To find the support email and phone, select Requested on the tile.If someone at your dealership sends a different number from a Distributors page they opened before you sent the request, they see this message:You already asked us to connect this distributor. To change the account number, contact support.
You cannot send a second request while this one is open. To see how long a connection usually takes, point at the button, or tap and hold it on a touch screen.
Contact support once 5 business days pass. To find the support email and phone, select Requested on the tile.If our team has not connected it 30 days after your request, the tile shows Set up by our team and Request connection again. Contact support before you send another request. Support checks your earlier request and tells you what happens next.
Yes. Each store has its own connections. Select the other store at the top left, then send a request from its Distributors page.

Choose whether TireTutor loads a distributor’s prices

TireTutor loads prices from every distributor that offers them, unless you say no when you connect.
1

Open Advanced settings

In the Connect dialog, select Advanced settings.
2

Choose the price option

Leave Enable price & quantity sync checked to load prices. Clear it to connect for ordering only.
Configure D&K Tire dialog with Advanced settings open, showing a checked box, Enable price & quantity sync, and a note that tires from this supplier appear in your catalog within 24 to 48 hours.

Advanced settings holds the choice to load the distributor's prices.

Advanced settings appears only the first time you connect. To turn prices on later, select Edit on the tile, then Enable for pricing. TireTutor adds the distributor’s prices to this store’s pricing. To stop using a distributor’s prices later, turn the distributor off in Tire Markups. See Getting started with tire markups.

Check whether a distributor is ready

A tile you connected, are waiting on, or cannot connect on your own shows a status chip. Point at the chip to read a short summary. Select the chip to read what it means and what happens next. While you wait, the tile shows how long the wait can be, for example Up to 2 business days.

What each status means

Waiting for US AutoForce to activate your account. The dialog says TireTutor asked US AutoForce to turn on the account, activation can take up to two business days, ordering starts once they do, and tires appear in the Tire Catalog within 24 to 48 hours after that.

Select a status chip to see what happens next.

What the Ordering and Pricing marks mean

Change your details or test a connection

On US AutoForce, Edit opens with Ask US AutoForce to enable this account checked. If no request is waiting and you select Save with the box checked, TireTutor sends US AutoForce a new request. If your account already works, clear the box before you save.While a request waits, TireTutor emails US AutoForce again only if you change the account details.
1

Select Edit

Select Edit on the distributor’s tile.
2

Change the details

Enter the new value. A saved key or password stays as it is if you leave its field alone.
3

Save your changes

Select Save. A S&S Tire credentials have been updated. message appears, with the name of your distributor.
4

Test the connection

Select Test saved configuration. The result appears in the dialog.
Edit S&S Tire dialog with Customer ID DEMO-20417, a Test saved configuration button and the result Connection OK.

Test saved configuration checks the details you saved last.

Test saved configuration uses the saved details. Save your changes before you test. Each result comes with a short message, for example Connection OK — Connection successful.

What each test result means

To ask K&M Tire for a new key:
  1. Select Edit on the K&M Tire tile.
  2. Select Key not working? Ask K&M Tire for a new one.
  3. Type your K&M account number in K&M Account Number (optional). If you do not know it, leave the box empty.
  4. Select Request a new API key.
To ask a HITS distributor to set up your connection again, select Edit. Select Not working? Ask Tom Fouts Tire to set them up again, with the name of your distributor. Then select Request a new connection. You cannot send a new request while one waits. While TireTutor waits for a distributor, its dialog shows Request sent to and the date.

Fix a TireHub account check

The TireHub tile shows Needs attention when TireTutor could not confirm your account. Point at the chip to read why, or select the chip. The dialog you used shows the same message. Each message names your account number.
A row of distributor tiles. The TireHub tile has a light red background, a red Needs attention chip, Ordering and Pricing not checked, and an Edit button. US AutoForce, Tom Fouts Tire and Tire Depot show Not connected and a Connect button.

Point at Needs attention to read why TireTutor could not confirm the account.

To correct a number:
1

Select Edit

Select Edit on the TireHub tile.
2

Correct the account number

Type the corrected account number.
3

Save the account number

Select Save. The Needs attention chip goes away.
4

Turn ordering and prices on again

Select Enable for ordering and Enable for pricing, whichever the dialog shows. TireTutor checks the account again.
After a ZIP code fix, or after a few minutes for TireHub did not answer, skip the first three steps. After five refused numbers in an hour, this message appears: Too many TireHub account numbers could not be confirmed. Try again in an hour, or contact TireTutor support. Wait an hour, or contact support.

How you know it worked

  • The tile shows Connected or Syncing prices.
  • Test saved configuration shows Connection OK.
  • TireTutor emails you when K&M Tire, US AutoForce or a HITS distributor turns on or sets up your account. No email on a connected HITS tile? See the next section.
  • The distributor’s tires appear in the Tire Catalog within 24 to 48 hours.

If it doesn’t work

An email says the connection could not be verified. The email says what to do next:
  • K&M Tire: select Edit, then Key not working? Ask K&M Tire for a new one. Select Request a new API key.
  • US AutoForce: select Edit. Correct the Account ID, keep the box checked, and select Save.
  • A HITS distributor: select Edit, then Not working? Ask Tom Fouts Tire to set them up again, with the name of your distributor. Select Request a new connection.
A tile shows Awaiting activation after two business days. Contact support. A tile shows Requested after 5 business days. Contact support. A tile shows Set up by our team again after you sent a request. Contact support before you send another request. An error says Tom Fouts Tire activation is not configured, with the name of your distributor. TireTutor cannot send requests to this distributor. Contact support. If you have your Customer Number and Password, enter them yourself instead. Your HITS distributor says it never got the request. Ask your distributor to check its spam folder. If the email is not there, contact support. Your distributor did not answer within 30 days. The tile shows Not connected again. To send a new link, select Connect, then Request connection. You do not know your HITS Customer Number. Leave the field empty. Your distributor fills it in when it sets up your connection. Test saved configuration shows Invalid credentials. Check your details with your distributor. Enter them again, save, and test again. A HITS tile shows Connected, but no email came. Only the person who sent the request gets this email. If that was you, check your spam folder first. If the email is not there, TireTutor could not reach HITS to check the connection. TireTutor emails your distributor and our team, but not you. To check it yourself, select Edit, then Test saved configuration.
  • Connection OK: the connection works. No email follows.
  • Supplier unreachable: test again the next day. If it still shows Supplier unreachable, contact support.
The distributor’s tires are not in the Tire Catalog. Prices can take up to 48 hours to load. A HITS distributor gives you ordering only, so it has no prices to load. If Pricing shows an empty circle, select Edit on the tile, then Enable for pricing. An order says to confirm your TireHub account. The message reads Confirm your TireHub account in Settings > Supplier APIs before ordering from TireHub. Your store’s TireHub account number has not passed the check yet. Follow Fix a TireHub account check. A distributor you buy from has no tile. Contact support.

Still need help?

Contact support through the contact form, or call 855-400-4521.

Where to go next

Set up your shop after you sign up

Set your taxes, shop fees, labor rate and distributors in one go.

Pricing

Set the markup on each distributor’s prices.

Connect K&M Tire with your account number

Add your K&M account number to your request, so K&M Tire finds your account.